Durango & Silverton Narrow Gauge Railroad

Overview
Headquarters	Durango, Colorado
Locale	La Plata County, Colorado San Juan County, Colorado
Dates of operation	1981–present
Technical
Track gauge	3 ft (914 mm)
Length	45 miles (72 km)
Other
Website	www.durangotrain.com
Route map v t e Durango and Silverton Narrow Gauge Railroad Legend Silverton Mineral Creek Animas River Deer Park Creek Elk Creek Animas River Needleton Water Tank Needleton Animas River Rockwood Grasshopper Creek Tank Creek Canyon Creek Animas River Elbert Creek US 550 Hermosa Trimble Lane 36th Street 32nd Street Junction Creek Huck Finn Pond 15th Street Bridge Durango Yard US 550 Durango

Durango and Silverton Narrow Gauge Railroad
U.S. National Register of Historic Places
U.S. National Historic Landmark
Highline above Animas Canyon
Show map of Colorado Show map of the United States
Location	Durango, Colorado Silverton, Colorado
Coordinates	37°17′51″N 107°52′14″W / 37.29750°N 107.87056°W / 37.29750; -107.87056
Built	1882
Architect	General William J. Palmer
NRHP reference No.	66000247[1][2]
Significant dates
Added to NRHP	October 15, 1966
Designated NHL	July 4, 1961

The Durango and Silverton Narrow Gauge Railroad, often abbreviated as the D&SNG, is a 3 ft (914 mm) narrow-gauge heritage railroad that operates on 45.2 mi (72.7 km) of track between Durango and Silverton, in the U.S. state of Colorado. The railway is a federally-designated National Historic Landmark and was also designated by the American Society of Civil Engineers as a National Historic Civil Engineering Landmark in 1968.^[3]

The route was originally opened in 1882 by the Denver and Rio Grande Western Railroad (D&RGW) to transport silver and gold ore mined from the San Juan Mountains. The line was an extension of the D&RG 3 ft (914 mm) narrow-gauge line from Antonito, Colorado, to Durango. The last train to operate into Durango from the east was on December 6, 1968. The states of New Mexico and Colorado purchased 64 miles of track between Antonito and Chama, New Mexico, in 1970, which is operated today as the Cumbres and Toltec Scenic Railroad (C&TSRR). Trackage between Chama and Durango was removed by 1971.

The line from Durango to Silverton has run continuously since 1881, although it is now a tourist and heritage line hauling passengers, and is one of the few places in the U.S. which has seen continuous use of steam locomotives. In March 1981, the Denver and Rio Grande Western Railroad (D&RGW) sold the line and the D&SNG was formed.^[4] Today, the D&SNG, along with the C&TSRR, are the only two remaining parts of the former D&RGW narrow-gauge network. The railroad has a total of nine narrow-gauge steam locomotives (eight of which are operational) and ten narrow-gauge diesel locomotives, six of which were acquired within the last five years, on its current roster.

Some rolling-stock dates back to the 1880s. Trains operate from Durango to the Cascade Wye in the winter months and Durango–Silverton during the summer months. Durango depot was built in January, 1882 and has been preserved in its original form.^[4]

History

William Jackson Palmer (1836–1908) was a former Union General (serving in the American Civil War) who came to Colorado after managing the construction of the Kansas Pacific Railway into Denver in 1870. Prior to the war, he had risen within the ranks of the Pennsylvania Railroad, serving as secretary to the president. After arriving in Denver, he formulated a plan to build a 3 ft (914 mm) narrow-gauge railroad southward from Denver to El Paso, Texas^[5] (see Denver and Rio Grande Western Railroad). In 1871, the Denver & Rio Grande Railway began to lay rails south from Denver. Palmer and his associates had agreed that the choice of 3 ft (914 mm) narrow-gauge would be well suited to the mountainous country, and relatively less expensive construction costs would enhance the viability of the new railroad. The original north–south plans of the D&RG eventually expanded to include extensions throughout the booming mining country of central and southwestern Colorado.

In July 1881, the Denver & Rio Grande reached Durango and started building the final 45-mile stretch up the Animas River to Silverton. The first 18 miles to Rockwood were completed by late November. The remainder of the route entered the narrow Animas Canyon, which has steep granite walls. The labor crew, made up of mostly Chinese and Irish immigrants, blasted the canyon cliffs off and left a narrow, level shelf to lay the tracks on. Grading was completed by late spring 1882.^[6]

The D&RG reached Silverton on July 10, 1882. Trains hauling passengers and freight began immediately. The D&RG soon re-emerged as the Denver and Rio Grande Railroad (1886) and ultimately began operating as the Denver and Rio Grande Western Railroad (D&RGW) on July 31, 1921, after re-organization of the Colorado lines and Rio Grande Western of Utah.^[7] Eventually, the railroad became widely known as the "Rio Grande".

The Silverton branch, as it became known, struggled under D&RG ownership following the Panic of 1893 and the end of free coinage of silver. Typical of many portions of the surviving narrow-gauge branches into the middle of the twentieth century, the line faced sagging revenue due to ever-declining mining ventures, highway trucking competition and insignificant passenger revenue. Annual snowslides and several major floods on the branch would only continue to challenge the railroad's ability to survive.

The Silverton

After World War II, domestic tourism began to grow across the country and the Silverton branch of the railroad would benefit. Bolstered by national exposure via Hollywood movies being filmed along the line in the late 1940s, the railroad created The Silverton, a summer-only train service, on June 24, 1947.^[8] A short time later, the railroad adorned a locomotive and four coaches with a colorful yellow paint scheme and launched modest public promotion. With this effort, "The Painted Train" officially started a new era of tourism that continues to this day. Freight traffic, however, continued to decline, and during the 1950s The Silverton operated as a mixed train.^[9]

By the 1960s, a modernized D&RGW did not see the Silverton Branch as worthy to maintain and a petition was filed with governmental agencies to abandon it. The Interstate Commerce Commission declined to grant the request due to the continued increase in tourist patronage. Following the ICC's ruling, the railroad reluctantly responded by investing in additional rolling stock, track maintenance and improvements to the Durango depot. The railroad purchased some of the property around the depot, cleaned up the block extending north to Sixth Street and facilitated the opening of gift shops and other tourist-friendly businesses. As ridership continued to grow, the D&RGW operated a second train to Silverton on certain days.^[10]

The 1970s

Since 1971, the Silverton branch and nearby Cumbres and Toltec Scenic Railroad (C&TSRR) were the only remnants of the Rio Grande's once extensive narrow-gauge system.^[4] During the late 1970s, the D&RGW was actively trying to sell the Silverton branch and, in 1979, Charles Bradshaw, a Florida citrus grower, offered the railroad a legitimate opportunity to divest itself of the now-isolated route. On October 5, 1980, The Silverton made its last run under D&RGW ownership and, after operating a work train the following day, the railroad finally concluded its 3 ft (914 mm) narrow-gauge train operations,^[11] bringing to a close an era that began 110 years earlier with its narrow-gauge railroad from Denver to Colorado Springs.

2000s

In June, 2018, the railroad shut down for several weeks due to a wildfire, named the "416 Fire",^[12] which was fought by two air tankers, six helicopters and some 400 firefighters on the ground.^[13] An estimated 54,129 acres (21,905 ha) of the San Juan National Forest were burned, with losses estimated at more than $31 million. Given the fire risk from coal cinder-sparked wildfires, the railroad's owner plans to invest several million dollars to replace coal-power with oil-power for its steam locomotives and has acquired two new narrow-gauge diesel locomotives.^[14] The railroad's coal-burning steam locomotives were suspected of sparking the "416 Fire" blaze,^[15] and some area businesses and residents filed a civil lawsuit against the railroad and its owner in mid-September, 2018.^[16] As of 2023, the railroad aims to have most, if not all, of its operational steam locomotives converted to oil-power.^[17] In March, 2020, the Coronavirus (COVID-19) outbreak in the country severely affected the US. For the safety and protection of guests and employees, the D&SNG suspended all operations until at least June 23, 2020.

New ownership

The D&SNG was founded by Charles Bradshaw Jr., of Florida, with the intent of purchasing the right-of-way and equipment while expanding the infrastructure and passenger revenue. His plans were fulfilled with the March 25, 1981, acquisition of the D&RGW's 45-mile (72 km) Silverton branch and all of its structures and rolling stock.^[4]

The improvements to the railroad in the 1980s would prove to be the most dramatic growth on the Silverton Branch since the earlier part of the century. Bolstered by the assistance of former Rio Grande operating managers and a relatively sizeable staff of new employees, Bradshaw's plans were set in motion immediately. Included in the sale were former D&RGW locomotives and rolling stock that had not seen service in Durango for many years. "K-36" and "K-37" class locomotives were eventually restored to operating condition, and these larger classes of engines operated to Silverton for the first time ever following bridge and right-of-way improvements to the line. 1880s vintage coaches were exquisitely restored and new coaches were added to the roster of rolling stock. For the first time in many years, double-headed trains (trains with two locomotives) and additional scheduled trains were employed to handle the continually-growing passenger trade. The Durango yard facilities also saw dramatic improvements. An extension was added to the old roundhouse, a new car shop was built on the site of the original "car barn", and the depot saw extensive repair and internal modifications. The workforce grew with the railroad, and Durango's tourist image expanded as new businesses and revamping of the old railroad town continued to take shape. The original 1881 Durango roundhouse was completely destroyed by fire in the winter of 1989. All six operable locomotives had been inside at the time and were damaged, but not beyond repair. All locomotives were eventually restored to operating condition. A new roundhouse was constructed on the same site, opening in early 1990, and its facade made use of bricks salvaged from the original building.^[4]

In March, 1997, Bradshaw sold the D&SNG to First American Railways, Inc., located in Hollywood, Florida. Then, in July, 1998, the railroad was sold again, to American Heritage Railways. At the time, American Heritage Railways was headquartered in Coral Gables, Florida. Since then, its headquarters were moved to Durango, Colorado. The D&SNG has two museums, one each in Durango and Silverton.

Management

• Allen C. Harper — owner and CEO
• Carol Harper — owner and president
• Jeff Johnson — general manager
• John Harper — senior vice president
• Cathy Swartz — CFO

D&SNG engines

This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (January 2018) (Learn how and when to remove this template message)

As of 2023, the Durango and Silverton Narrow Gauge Railroad appears to operate nineteen locomotives, eight coal-fired and/or converted oil-fired steam locomotives and nine diesel locomotives. The current roster goes as follows:

Copyright.sk © 2024

Number	Image	Type	Wheel Arrangement	Classification	Builder	Built	Serial Number	Former	Status	In Service	At Durango	Notes
42		Steam	2-8-0	C-17	Baldwin Locomotive Works	1887	8626